NIBE Air Source Heat Pumps

Technical Overview


NIBE FIGHTER air source heat pumps utilise the outside air so there is no need for bore holes or coils in the ground. The NIBE FIGHTER 2015 air source heat pump is designed to be docked to water based heating systems.

 

NIBE Fighter 2015 Air Source Heat Pump

 

NIBE Fighter Air Source Heat Pump

Single Phase

2015-6

Single Phase

2015-8

Single Phase

2015-11

Heat Pump Delivered/Supplied Power* at 2/35°C ** 5.4 / 1.4 KW 7.1 / 1.8 KW 9.4 / 2.6 KW
Heat Pump Delivered/Supplied Power* at 7/35°C ** 6.3 / 1.4 KW 8.2 / 1.9 KW 11.1 / 2.6 KW
Heat Pump Delivered/Supplied Power* at -7/45°C ** 3.7 / 1.6 KW 5.0 / 2.1 KW 7.1 / 2.9 KW
Heat Pump Delivered/Supplied Power* at 0/45°C ** 4.9 / 1.6 KW 6.4 / 2.1 KW 8.8 / 3.1 KW
Heat Pump Delivered/Supplied Power* at 7/45°C ** 6.0 / 1.7 KW 7.8 / 2.2 KW 10.9 / 3.2 KW
Heat Pump Delivered/Supplied Power* at -7/50°C ** 3.6 / 7.1 KW 4.9 / 2.3 KW 7.1 / 3.2 KW
Heat Pump Delivered/Supplied Power* at 2/50°C ** 5.0 / 1.8 KW 6.6 / 2.4 KW 9.2 / 3.4 KW
Heat Pump Delivered/Supplied Power* at 7/50°C ** 5.9 / 1.8 KW 7.6 / 2.4 KW 10.8 / 3.6 KW
Heat Pump Delivered/Supplied Power* at 15/50°C ** 7.2 / 1.9 KW 9.2 / 2.4 KW 12.8 / 3.6 KW
Starting Current 17 A 19 A 27 A
Motor Protection Setting 14 A 18 A 22 A
Soft Start Relay As Standard As Standard As Standard
Operating Voltage 230v + N + PE 50 Hz 230v + N + PE 50 Hz 230v + N + PE 50 Hz
Compressor Scroll Compressor Scroll Compressor Scroll Compressor
Nominal flow heating medium 0.16 l/s 0.20 l/s 0.25 l/s
Internal pressure drop at nominal flow 1.3 kPa 1.5 kPa 2.2 kPa
Air Flow 1500 m³/h 1700/2000 m³h 1700/2000 m³h
Nominal output fan 70 W 90/130 W 90/130 W
Fuse 10 A 10 A 16 A
Enclosure Cla IP 24 IP 24 IP 24
Max outgoing heating medium temperature 58° C 58° C 58° C
Refrigerant quantity (R407C) 1.9 kg 2.1 kg 2.1 kg
Connecting heating medium male diametre G1(Ø 28 mm) G1(Ø 28 mm) G1(Ø 28 mm)
Defrosting System hot gas defrosting hot gas defrosting hot gas defrosting
Cut-out value pressotat HP 29 bar 29 bar 29 bar
Cut-out value pressotat LP 0.3 bar 0.3 bar 0.3 bar
Difference pressotat HP -7 bar -7 bar -7 bar
Difference pressotat LP + 0.7 bar + 0.7 bar + 0.7 bar
Height with stand 1045mm 1045mm 1045 mm
Width 1200mm 1200mm 1200mm
Depth 520mm 520mm 520mm
Weight 120 kg 126 kg 132 kg

* For compressor, ventilator and control. The relation between ”heating capacity and receptivity” must be reduced by approx. 10% during defrosting.
** Outside air temperature/flow temperature

 

 


 

Solo Heating Installations recommend NIBE Air Source Heat pumps.

Visit their site for more details

NIBE Ground Source Heat Pumps

38 Racefield Close, Shorne, Gravesend, Kent, DA12 3EL Tel: 01474 822 701 E-mail: info@soloheatinginstallations.co.uk............
Copyright © Solo Heating Installations Ltd. 2010 All rights reserved............